Camera & camcorder repair videos.
We provide a reasonable repair price, fast turnaround time, free estimates & free shipping.
Highly skilled technicians in-house.
We are proud to have provided the highest customer satisfaction rating in the U.S. for over 20 years
This video shows you how to remove the whole tape drive system N220 chassis on the Sony GV-HD700
This video shows you how to repair C:32:11 or C:32:10 loading timeout error code on Sony HDR-HC9, the Almost same procedure to HC3, HC5 & HC7 camcorders.
This video shows you how to repair C:32:60 focus lens initialize error on Sony HVR-Z5U & HDR-FX1000 video cameras.
This video will show you how to disassemble Canon XHA1.
This video will show you how to repair the tape door open stuck problem on Sony DCR-IP5 and IP7 camcorders.
You may have experienced C:32:11 C:32:10 error and stuck or stuck open on Sony Handycam HDV or Mini-DV camcorders, this video shows how to replace it.
This is a full video to repair C:32:11 error code for Sony Handycam DCR-HC96.
Beyond 9 minutes of this video, will be same procedure to all the newer Sony camcorders that facing to C:32:11 error message.
Including HDR-FX7, Z5, HVR-HD1000, HDR-FX1000, HDR-HC1, HDR-HC3, HDR-HC5, HDR-HC7, HDR-HC9 and any Sony camcorder that MD N220 sub-chassis installed.
The error code C:32:11 is a most common issue on newer Sony camcorders that the N220 sub-chassis installed.
Sometimes it fixes the error by pressing the reset button, but technically and logically, it won’t work.
The cause is the poor contacts between the mode gear and the golden sensing plate (Encoder) and this poor contacts caused by the dried grease.
These two parts work together to detect the position of the sliding chassis – Rotary Encoder.
Below is how to tweak the C:32:11 error code but it is not permanent.
To proper repair, remove old grease and re-grease on both mode gear and golden sensing plate.